CIL About

Director CIL: Prof. Ashok Sharma
E-mail: directorcil@dcrustm.org
Phone Number: 0130-2484114

There are number of educational institutions and industries surrounding this local area, but no significant facilities are available in the surrounding where academicians, researchers, technologists can get together and share their views & experiences about new techniques and applications of various instruments in research under one roof. In order to cater the needs of all the departments for sophisticated instruments at our campus, Central Instrumentation Laboratory was established in April 2011.

CIL is located in the premises of central workshop. All students, researchers and faculty members from various science and engineering departments of the university and its affiliated colleges are free to avail the services of CIL as per the guidelines laid by the Committee of the CIL. These guidelines are regularly reviewed from time to time. While outside users from Industries, Research & Development Organizations and other educational institutions can be allowed to avail this facility with permission as per guidelines.

FTIR (Perkin Elmer FRONTIER) (250-8000 cm-1)

  • Universal sample holder for analysis using KBr pallet technique
  • ATR with diamond tip for analysis of powders, liquids and thin films using specular reflectance(start from 550 cm-1)
  • Demountable liquid cell for analysis of samples in liquid form.
  • Magnetic film holder for analysis of thin films.
  • DRS with small and large sample cavities for analysis of powdered samples using diffuse reflectance.
  • Spectrum 10 platform for base line, noise and background corrections.

Impedance analyzer (HIOKI IM3570)

  • Temperature range of -120oC to 250oC (currently in operation from room temp.)
  •  Frequency range 5Hz to 5MHz.
  • A total of 14 parameters i.e. Rs, Rp, Cs, Cp, Ls, Lp, X, Y, Z, Θ, Rdc, D,  G, B measured with a constant voltage range of ±2.5 V (Res. 0.001 V).
  • Online Software for taking out scans of temperature at fix frequencies and scans of frequency at fix temperatures.

Simultaneous Thermal Analyzer (Perkin Elmer STA 6000)

  • Temperature range from 20 to 995oC with heating rate from 5 to 800C per minute.
  • Nitrogen and air atmospheres with different flow rates of Nitrogen with a resolution of 1 ml/min
  • Simultaneous DSC/TGA/DTA measurements
  • Option to take derivatives of all thermal scans
  • Small cavity for less sample requirements (8 mg only)
  • TGA with weight resolution of 0.001 mg

UV/VIS (Shimadzu UV-2450)

  • Wavelength range from 200-800 nm
  • Data acquisition in absorbance, transmittance, reflectance and energy modes.
  • Liquid sample analysis using Demountable cuvetts
  • Solid sample and thin film analysis using solid state accessory

 CIL Staff

S.No. Name  
1. Mr. Narender Kumar Lab Technician Grade B
2. Komal Research Associate
3. Joginder Kumar Peon (DC Rate)

 

CIL Advisory Committee

S.No.

Name Departments

Qualification

  e-mail

1.

Prof. B.P. Malik    Physics

PhD

drbpmalik@rediffmail.com

2.

Prof. Partibha Chaudhary   Chemistry

PhD

drpratibhachaudhary.chem@dcrustm.org

3.

Prof. J.S. Rana      Bio-Technology

PhD

drjsrana.bt@dcrustm.org

4.

Prof M.N Misra  Mechanical       Dept.

PhD

drmnmishra.me@dcrustm.org

5.

Prof. Ashok Sharma Director          PhD directorcil@dcrustm.org

1st workshop on “Recent Analytical Advanced Developments in Applied Sciences:

A workshop on “Recent Analytical Advanced Developments in Applied Sciences” was organized by Central Instrumentation Laboratory at Deenbandhu Chhotu Ram University of Science & Technology on 13-14 August 2012. Nearly 170 scholar and other dignitaries were registered through mail & on spot in the workshop. The inaugural session started with the welcome note & a brief introduction about the central instrumentation laboratory by Coordinator CIL & coordinator workshop Dr Satish Khasa.  Hon’able Vice chancellor Er. H S Chahal chief guest for the inaugural session said that we should focus more on team work in addition to personal ones. He also told about day & night lab, the clean lab concept & emphasised to adopt the best practices. On this occasion, Prof B P Singh Dean Academic Affairs emphasized on the need to improve facilities for research in Science.

Overall the workshop was a great success.

Inauguration of CIL: The new campus was inaugurated by Hon’ble Vice Chancellor  on 06/05/2013. It has been developed in existing workshop area. It spreads in nearly 5000 sq. feet and consists five division:

First      – Office of the coordinator.

Second – Demonstration cum meeting room.

Third     – Thermal Lab (Simultaneous Thermal Analysis equipment with backup      facilities) lab.

Forth     –Various research equipments related like UV, IR spectroscopy, Impedance  spectroscopy etc. are optional in the Lab

Fifth      – This Lab will have various research equipments related to adv.      Research areas like XRD, particle analyzer, SEM etc.) .

 One day workshop on “”Lab Governance

  A one day workshop on “Lab Governance” was organized on 28/06/2013 by Central Instrumentation Laboratory, DCRUST, Murthal. Dr. S.K. Varshney, Scientist ‘F’, DST, Delhi was the inaugural speaker of the event. He presented his views on maintenance, calibration of instruments and strongly state that wrong Calibrations can destroy all results taken from various studies and their impact on society is unforgettable. The workshop was inaugurated by Sh. R. K. Arora, Registrar, DCRUST, Murthal. He emphasized on importance of Experimental Science which is backbone of research in every area and administration is all providing their support for such kind workshop in university. The coordinator of CIL Dr. Satish Khasa explain the motive of workshop i.e. “Lab governance”  and explain how we can improve our skills and good lab practices to in-rich our research/ regular labs.  Dr. Prem Chand, Director P. M. Institute of Engineering & Technology, Kami shares his views on advance research techniques and told that no university/ institute can represent him at the global level until they have good research facilities’ and DCRUST Murthal is perusing this at good pace. In the workshop Dr. Manoj Duhan,  Electronics and Communication Engineering, DCRUST, Murthal motivated the technical staff by his innovative lecture on ‘Ethics in Lab’. All the participants were given demonstrations & practical experiences of various instruments in different laboratories.

National conference on “Advances in Multidisciplinary Aspects of Science & Engineering(AMASE 2016)”, Nov. 23, 2016

About The Conference

The scientific, engineering and technological progressions in modern age have facilitated the human life in multiple dimensions. We feel highly encouraged while utilizing the variety of services encompassed by recent advances in science and engineering. AMASE-2016 is aimed at providing a platform to Scientists, Industrialists, Academicians, Researchers and Students to share their innovative ideas and results via abstracts presentations. The outstanding abstracts will be appreciated.

A workshop on material characterization  for the M.Sc/ M.Tech students &Research scholars was organized by Central Instrumentation Laboratory , DCRUST Murthal from 24th to 27th  April,2017. Classroom session followed by practical demonstration was organized for better understanding of the concept. FTIR Spectroscopy, UV-visible, STA Thermal & Impedance Analyser were the instrument demonstrated. Students actively participated in the workshop and an interactive session was organized.

Rates for outside scholars/ industries:

 

Sr. No. Instrument Type of Service Charges(INR)
1. F. T. Infra Red Spectrophotometer Absorption/ Transmission Spectra -100/- per sample
2. Thermal Analyzer (TGA/DSC/DTA) Heat Flow/ Weight Loss/ Differential Curve -100/- per sample
3. Impedance Analyzer A.C./D.C. Conductivity data -100/- per sample
4. Ultraviolet-Visible Spectrophotometer (borrowed from Chemistry Dept.) UV/VIS spectra

*The rates can be modified at any time as per the requirement

N.B:

No charge will be taken from the user of parent institute.

The charges given above are for educational institutions. National laboratories, private and Govt. small-scale industries will be charged two times the above rate. All other will be charged three times the above rate.

Road Ahead:

CIL is now just in its beginning state the following equipments/facilities are proposed in future in the CIL:

 

Equipment/Facility

Status

Single Crystal X-Ray Diffracto-meter (Powder Method)    Installed in Physics Dept.
Spectro fluoro  meter (Fluorescent Meter)

Proposal submitted

Scanning electron microscope (SEM) with EDS

Proposal submitted

Particle analyzer

In pipeline

Transmission electron microscope (TEM)

Proposed

NMR Spectrometers

Proposed

Liquid Chromatography & Mass Spectrometer(LCMS)

Proposed

EPR spectrometer

Proposed

De-ionized Water Plant

Proposed

UV/VIS Spectrometer

Installed

Inductive coupled Plasma spectrophotometer (ICP)

Proposed

Liquid Nitrogen  Plant

Proposed


Usual sample preparation accessories associated with available instruments as per required. Along with these equipments the efforts will also be made to conduct some academic degree and training courses in instrumentation.

Also various short term courses and training programmers will be carried out by CIL to make the scholars familiar with the latest technology.

Click Here to Download   Requisition Form

Prof. Ashok Sharma 
Director
CIL, DCRUST, Murthal
Telephone: +0130-2484114
E-mail: directorcil@dcrustm.org

Ms. Komal
Research Associate
CIL, DCRUST Murthal
Telephone: 0130-2484114
E-mail: directorcil@dcrustm.org